1, strengthen the training of maintenance personnel
On the one hand, the urban garden lights are closely related to the citizens' lives. The quality of its operation directly affects the image of the party and the government. It is necessary to educate maintenance personnel on the maintenance of garden lights and enhance their sense of responsibility. On the other hand, with the acceleration of technological advances in urban garden lights, the extensive use of new technologies requires maintenance personnel to constantly update the maintenance expertise and adapt to job requirements.
2, accelerate the update of maintenance equipment
With the expansion of the city, the increase in the number of garden lights and service areas has increased the workload of maintenance personnel. Without increasing the number of personnel, it is necessary to constantly improve and update maintenance equipment to improve work efficiency.
3, the implementation of the maintenance of the target responsibility system
On the basis of the delimitation of the garden lamp management area, the maintenance responsibility system shall be implemented at all levels to implement fixed, fixed, and assigned duties, to carry out regular inspections, regular maintenance, and to find out who is responsible for any problems.
4. Strengthen the investigation and enforcement of law enforcement
On the one hand, speeding up the development of regulatory documents on the management of garden lights and creating conditions for the management of the law; on the other hand, the joint urban management department will intensify the law enforcement of courtyard lamps, severely investigate and punish the destruction of courtyard lighting facilities, and ensure the normal operation of courtyard lighting facilities.
1. Do not hang objects on the lamp, such as air quilts.
2. Frequent switching will greatly reduce the service life, so when using the lamp, the switch of the lamp should be minimized;
3. When the lamp shade is found to be tilted during use or cleaning, it should be readily corrected to maintain the appearance;
4. When adjusting the lampshade, pay attention to avoid the reflection shadow of the trigeminal bracket in the lighting when lighting;
5, according to the sign of the light source parameters to replace the aging lamp in time, found that the lamp ends red, black or dark tube lamp, lamp does not jump, should replace the lamp, to prevent the emergence of ballast Burning and other unsafe phenomena.
1, landscape garden lighting is generally more dust, clean with a wet rag to wipe, action to maintain the same direction, do not wipe back and forth, the intensity should be moderate, especially for the treatment of chandeliers, wall lights to be gentle.
2. Clean the interior of the lighting. When you clean the lamp, you must first turn off the lights. When you wipe it, you can remove the lamp by yourself. If you are cleaning directly on the fixture, do not rotate the bulb clockwise to prevent the lamp head from peeling too tightly.
Related Industry Knowledge
- The main features of LED street lamps are intro...
- Common lighting design techniques for landscape...
- Landscape lamp design requirements
- Festive lanterns adorn the festival life
- How to identify the good or bad holiday lights
- The comparison between holiday lights and LED s...
- The holiday lights are out of order
- A cleaning technique for holiday lights
- Introduction of solar ceramic decoration lamp f...
- Solar energy source
- What are the functions of solar wall lights
- Solar street lamp prices determine the choice o...
- How to install solar lawn lights?
- What are the classifications of street lamps?
- Solar street light advantage
- Five advantages of solar street lights
- Solar street light compared to ordinary light
- Common causes of damage to the leading lamp hea...
- Protective measures for stainless steel garden ...
- Introduction of solar sensor lights